PDA

View Full Version : Anyone need a Hacker prog box???

DrScoles
05-25-2005, 12:07 AM
I have one, think it was $44....sell for $30 shipped.....

Thanks, Mike
skippy
05-25-2005, 10:53 PM
PM Sent
Laurens
05-26-2005, 04:40 AM
Saving up for one.
DrScoles
05-26-2005, 10:04 AM
sold to Will...

thanks!

Mike
WillJames
05-31-2005, 03:12 AM
:glasses2:
Laurens
05-31-2005, 12:22 PM
Will do a review in the review section for us!!!
WillJames
05-31-2005, 01:57 PM
I can do that Laurens. I really want to look at my soft start settings, and maybe try governor mode, or maybe just put a GV-1 on it like Shannon did with his Ion-X
Laurens
05-31-2005, 03:35 PM
I'm thinking about buying one for the lipoly V2 Carbon. Just need some reference from it.
WillJames
06-05-2005, 10:18 AM
Got the programmer today. Thank you Mike!! Looks like 100% brand new.
simon109
06-06-2005, 08:52 AM
Hi,

Got a question on the Prog Box on the throttle curve setting, which should I use LOGARITHMICAL, LINEAR or EXPONETIAL ?

Simon.
WillJames
06-06-2005, 09:24 AM
Good Question Simon. It came with no directions, so I figured I would try to find some on the net before I use it. If anyone has them, please share.
simon109
06-06-2005, 12:29 PM
LOGARITHMICAL is the default setting, I got a good set of instructions off the web for the box and it says

LOGARITHMICAL : This setting has most of the throttle acting before half throttle.

LINEAR : This setting divides the power evenly along the whole range of the throttle stick.

EXPONETIAL : This setting has most of the throttle acting after half throttle.

I would think its either Linear or Exponetial, I am thinking it's more Exponetial as your throttle curves are normaly all above 80% but I maybe completly wrong.

Simon.
simon109
06-06-2005, 12:32 PM
Found the link, http://www.hackerbrushless.com/MasterProgInstructions.pdf

Simon.
WillJames
06-06-2005, 01:46 PM
SWEET!! Thank you Simon!!
simon109
06-06-2005, 01:53 PM
No probs :glasses:

So does anyone know which setting we should use ?

Simon.
bob00
06-06-2005, 02:19 PM
LINEAR seems to work well w/ 100 - 85 - 100 "V" curve with 40% cyclic-throttle mix.

Using 5deg timing with the Actro 32-3 heli motor - seems to work really well - has anybody played with this setting much?

- Rob
WillJames
06-06-2005, 03:05 PM
Just used my programmer on my setup. The timing was set at 20 degrees. Not sure how. All the rest of the settings were right in line with what they should be. I set the timing to 5 degrees and I will try to test fly soon and let you guys know how if flys. Mine is also set to LOGARITHMICAL. I am running 83% all the way across my curve for I1, 91 for I2 and 0-100 for normal, I am using a 9ZZCII.