200 Parts . . .

[papa-alpha]

I need help sourcing a couple of parts for a Gaui 200. After a couple of flights this morning I augured it in pretty good. Normal things broke and I can find them at ReadyHeli and other places, but a couple things I can't find anywhere . HELP !!!

- the fixed length links that hang from the balls on the flybar shaft and go down to the mixing arms. Little (well everything is little !) black plastic fixed links with a 90 deg twist.
- the mixing arms - connected to the link above and mounted on the end of the blade grip arm, the link on the other side goes down to the swash plate.

If someone has a Taiwan source (or anywhere else) that has more parts, it would be great.

Thanks,

Phil

[scarr]

You need for the flybar 90 deg. to see saw,

http://www.readyheli.com/203326_Universal_Links_Pack_3_5mm_Gaui_Hurricane_p/203326.htm


For the rest of the links these should work.

http://www.readyheli.com/203211_Linkage_Set_Hurricane_200_p/203211.htm

[Mikej]

Look at www.flying-hobby.com under EP100 OEM parts, in fact - here you go, you can get them both here http://flying-hobby.com/catalog/product_info.php?cPath=3_5_8&products_id=18 or just the links here http://flying-hobby.com/catalog/product_info.php?cPath=3_5_8&products_id=60

[papa-alpha]

Thanks guys. Parts are on the way.

phil

[papa.alpha]

While I was looking around for parts I did find another domestic (US) source that has a lot of 200 parts. I have ordered parts from them without any trouble to date.

www.allerc.com in AZ

It seems Gaui has a lot of parts available but most retailers don't carry many of them and often they are packaged a little differently. When I crashed the other day the boom bent around the boom support bracket and broke it. I found lots of boom supports, but no brackets. Then I found someone that had the bracket included with the supports under a different Gaui part number. It was the only one I found.

O' well, it will all go back together soon and I can fly it again.


Phil