GV1 and rotor headspeed

[Xtreme*76]

Goodmorning to all
I tried to set my Gv1 on 14mz (8.36 grt)
following all the instructions (sen is 97%)
I did everything but I noticed that
when I have 1700 on idle1 the rotor is 1750
Idle2 on radio is 1800 the rotor is 1850
How is it possible this situation?
I setted another Gv1 on another Fury 8.18
and on that model is perfect
I don't know
Please help with suggestions
Best regards
Giuseppe

[DavidH]

Sounds like you didn't train the GV1 to use the settings from the 14MZ.
You have to manually ( train) set up the GV1 to accept the settings from the 14MZ.
I would guess this is similar to how the setup is with the 9C. Set the GV1 to the lowest RPM settings and then the highest RPM settings.

The speed that is showing the menu of the GV1 is what speed the rotor should be turning when in each condition.

David