Need help putting head back together

[adelmasw]

Because the exploded view of the heli is so small i am having trouble putting the head back together. my problem is which side to connect the long and short push rod to.

To be specific: on the blade holder - part number 015 - there is a lever. the lever has a longer side and a shorter side with balls on each side. The arm of the blade holder goes through the middle. Does the long push-rod go to the long side or the short side f this lever. Clearly this will dictate where the short push rod goes.

Thanks in advance.

[capebob]

Using the long pushrod the long side of the mixer arm goes to the swash plate.
Bob

[adelmasw]

Thank you. Just wanted to make sure that i had the right throws before making sure everything was level at half throttle.