PDA

View Full Version : Airthunder and Kong pack users.


nim
01-31-2008, 12:46 PM
Is anyone using one of those manufacturers 2200mah pack in the blade 400? Does it fit under the canopy and how are they balancing out? Im ready to buy a couple of packs but these are the only company packs I will use in any of my birds.

kevntri
01-31-2008, 01:06 PM
I have an AT.
It is a tight fight.
It makes the heli just slightly nose heavy. Just a few clicks of trim
It goes way out of balance after every use though. It comes back with a 205 TP balancer, just takes a while.

widower
01-31-2008, 07:33 PM
I have a 'parkzone' 2200. Same thing here. A couple clicks of trim and a snug canopy. I don't know anything about how unbalanced the pack is after flying. I just use the eflite charger and am up and running after an hour or so.

VIRUSS11
02-03-2008, 12:01 AM
Is anyone using one of those manufacturers 2200mah pack in the blade 400? Does it fit under the canopy and how are they balancing out? Im ready to buy a couple of packs but these are the only company packs I will use in any of my birds.

I use the Kong Power 2200mAH 25c Li-po, Its a little bite heaver Li-po and little tight under the canopy, and a little nose heavy. But all in all I'm very happy with it, more power and longer flight times

treaves
02-04-2008, 02:18 PM
I have two of the AT; I ended up making a second hole for the rubber grommets so the canopy is easier to get on. Even with the factory battery I though it was a bit tight.

Don't know yet how they balance out, as on my first AT battery I chipped a blade. Stupid computer getting in the way!

As it happens, I just wrote a really nice app for OS X and the Bantam eStation charges, so I'll let you know how mine balance out. It'll be this weekend before I get back home though.