adam crosby
02-02-2008, 06:01 AM
I got these off www.trextuning.com, I think it is based in the Uk. Well are they true?
I am interested in knowing as i want to buy a 500.
Pros
Inexpensive for what you get
Good quality considering the price
Looks fantastic
Extremely easy to build, with an excellent manual
Excellent power on the 500L motor
Flies like a T-Rex 600, very 3D capable
Very strong and rigid frames
Appropriate lithium polymer packs are not too expensive for this model
Can run on two T-Rex 450 packs in series
Many different pack configurations are possible
ESC BEC switchable between 5V and 6V
Cons
Soft plastic used for the frame components
Damping is too soft
ESC governor causes tail wag
ESC BEC is suspected of causing a spektrum rx reset due to low voltage
Not a huge amount of room in the canopy for bigger packs
Servo geometry
Canopy has to be trimmed to miss servo push rods
Canopy retaining clip is too wide and causes the canopy to crack
Tail heavy when utilising two T-Rex 450 packs
Really needs a standard tail servo to get the best out of the tail system
I am interested in knowing as i want to buy a 500.
Pros
Inexpensive for what you get
Good quality considering the price
Looks fantastic
Extremely easy to build, with an excellent manual
Excellent power on the 500L motor
Flies like a T-Rex 600, very 3D capable
Very strong and rigid frames
Appropriate lithium polymer packs are not too expensive for this model
Can run on two T-Rex 450 packs in series
Many different pack configurations are possible
ESC BEC switchable between 5V and 6V
Cons
Soft plastic used for the frame components
Damping is too soft
ESC governor causes tail wag
ESC BEC is suspected of causing a spektrum rx reset due to low voltage
Not a huge amount of room in the canopy for bigger packs
Servo geometry
Canopy has to be trimmed to miss servo push rods
Canopy retaining clip is too wide and causes the canopy to crack
Tail heavy when utilising two T-Rex 450 packs
Really needs a standard tail servo to get the best out of the tail system