PDA

View Full Version : stubz paddles which one???

Street Flyer
02-03-2008, 06:21 PM
I saw some people mentioning the Stubz paddles on another thread, and didn't want to take it off topic. Tell me what you think of them if you use them. Also, what stubz paddles fit the 600n flybar? One last thing, what is the difference between the super stubz and the regular stubz?

Thanks in advance,
Street Flyer
heliMark
02-03-2008, 06:32 PM
the super stubz are great but are a little fragile, you need to be careful with them, you want the 3mm ones for your 600n. very fast, very fun! little pitchy in fast forward flight but an awesome fast 3d paddle

mark
invertmast
02-03-2008, 06:46 PM
3mm ones.. super stubz feel like your going to break them just putting them on. i wouldn't call them "super" fast, but they do quicken up the reaction of the heli. They are a bit pitchy in FFF, but i've seen worse from other paddles. They are pitchy during auto's also, which is about the only thing i dont like about them, but overall.. they rock except for the price. ($20 overpriced IMO)
cbdane
02-03-2008, 06:55 PM
3mm ones.. super stubz feel like your going to break them just putting them on.

I always thought that also but it doesn't seem as fragile as I had guessed. A few months ago my flybar fatigued and broke right at the cage. :shock: On an expedition to rescue plank debris, a club member found it a couple of weeks later absolutely unscathed. Probably didn't hit too hard but the flybar half and weight were still attached and I was thrilled to get this little "overpriced" item back without a scratch!
invertmast
02-03-2008, 07:24 PM
I always thought that also but it doesn't seem as fragile as I had guessed. A few months ago my flybar fatigued and broke right at the cage. :shock: On an expedition to rescue plank debris, a club member found it a couple of weeks later absolutely unscathed. Probably didn't hit too hard but the flybar half and weight were still attached and I was thrilled to get this little "overpriced" item back without a scratch!

your running the weights? i didn't even waste my time putting them on.. and the thing is STILL to slow..


its time for a knight 3D or a flybarless setup