Billybuck
02-04-2008, 06:05 AM
Hold Delay
The Hold Delay function allows the throttle servos
movement to be slowed when switching from Throttle
Hold back to a previous Flight Mode. This feature is
helpful when practicing Autos. If the autorotation attempt
is not going well, when the Throttle Hold switch is
released, the throttle will increase more slowly, eliminating
any sudden bursts of throttle which could damage the
mechanics of the model.
The adjustable range is from 1/10 of a second, up to a full
2 seconds of delay.
What is a good setting for the delay?
The Hold Delay function allows the throttle servos
movement to be slowed when switching from Throttle
Hold back to a previous Flight Mode. This feature is
helpful when practicing Autos. If the autorotation attempt
is not going well, when the Throttle Hold switch is
released, the throttle will increase more slowly, eliminating
any sudden bursts of throttle which could damage the
mechanics of the model.
The adjustable range is from 1/10 of a second, up to a full
2 seconds of delay.
What is a good setting for the delay?