For sale Stretched E550 Raptor with extra stuff Price reduced

[2kwik2c]

I'm trying to sell my unfinished Raptor E550 with a Raptor Titan stretched tail boom kit project in which I was trying convert it to an E620. It's an incomplete project because the brushless motor and ESC is not the right match for this conversion. You'll need a 610KV brushless motor and an ESC that can run a 10s Lipo battery before you can attempt to fly it with this conversion. I just didn't have the time to upgrade the motor and ESC. Otherwise in its original E550 form everything else is set and ready to go.

Before its conversion, I was flying this heli in it's original E550 form. I only had about 10 flights on this bird. Never flew it hard nor had any crashes in the past. I mostly do sport flying with this heli. Everything you see are all orginal from the time I purchase this with the exception of the extra parts and upgrades.

Here's the specs:

Raptor E550 with a Titan stretched tail boom kit.
Mavrikk metal hub with phasor ring.
Stock plastic blade grips.
Mavrikk 620mm Fiberglass blades.
Raptor 550mm CF blades.
Century 1100 Kv Brushless motor.
Century Electron 80A ESC.
Spektrum AR6200 receiver that comes with a bind plug to bind in any Spektrum DX7 Tx.
JR DS821 servos for cyclic control
Futaba 401 Gyro with a Futaba 9254 servos for the tail control
(2) Two Version 2 canopy (one E620 scheme and the other a custom painted canopy)
Freya Evo90 low profile landing skids.
Stock Raptor E550 high profile landing skids with skid stops.
Carbon Fiber tail wing
Brand new Raptor Ultra light fly bar paddles (neon green)
Raptor Titan tail boom crash kit w/o main blades (contains all the parts of the original E550 tail boom, tail boom support, E550 belt, and other extra parts.)

This sale doesn't come with a lipo battery and receiver battery.

Asking price: $850.

Basically this helicopter is somewhat of an ARF kit. Like I mentioned before you can fly this heli with the upgraded stretched tail boom as long as you have replaced the ESC and brushless motor to match with the upgrade. Don't fly it in it's upgraded from using the original motor and ESC or else the heli won't fly right. However, if you want to run the original motor and ESC setup, I suggest that you put back the original E550 tail boom kit with the CF 550mm blades that comes with this sale. Then you can run this baby around.

I'm located in Chino Hills, California. Sorry for out-of-state buyers for I prefer local buyer (Southern California). I wouldn't like to go through the hassle of shipping all this stuff out.

http://img.photobucket.com/albums/v252/2kwik2c/P1010239.jpg

http://img.photobucket.com/albums/v252/2kwik2c/P1010240.jpg

http://img.photobucket.com/albums/v252/2kwik2c/P1010241.jpg

http://img.photobucket.com/albums/v252/2kwik2c/P1010242.jpg

http://img.photobucket.com/albums/v252/2kwik2c/P1010243.jpg

http://img.photobucket.com/albums/v252/2kwik2c/P1010246.jpg

http://img.photobucket.com/albums/v252/2kwik2c/P1010248.jpg

http://img.photobucket.com/albums/v252/2kwik2c/P1010249.jpg

http://img.photobucket.com/albums/v252/2kwik2c/P1010250.jpg

http://img.photobucket.com/albums/v252/2kwik2c/P1010251.jpg

http://img.photobucket.com/albums/v252/2kwik2c/P1010252.jpg

Not included in the pictures is the Thunder tiger E550 CF main blades and Spektrum bind plug which is included in this sale.

Should you have any questions please email me at takumi344@msn.com

Thanks for looking.

[2kwik2c]

Edit for the post above:

Final Reduced Price for the Raptor E550......$650

[2kwik2c]

Priced reduced to $450. This helicopter will come with the AR7000 receiver instead of the AR6200. If interested in the AR6200 receiver please let me know. Price for the AR6200 is $60 plus shipping. I'm only accepting Paypal or cash. Please add 3% if paying paypal.

I'm not going to part out this item nor will I accept any form of trades.

This helicopter in its current form requires a much powerful brushless motor and an ESC that could handle up to 10S lipo battery. The brushless motor and ESC in the picture is for E550 usage not E620 form. Let me know if you're interested by emailing at takumi344@msn.com or simply PM me through helifreak.

Thank you for looking.

[2kwik2c]

Bump for a lowered price! $450 or throw me some reasonable offers without any type of trades.

[2kwik2c]

I can't edit my very first post, so the info about not shipping anywhere is still there. I want to inform out-of-state buyers that I can ship this item anywhere. Please disregard the info about not shipping out of state.

Of course I'll ship this item at buyers expense.

[cughe]

hi,need total heli. complete with shipping and paypal fee shipped to 32303,thks.

[cughe]

hear nothing from you...? found another,thks.

[2kwik2c]

Bump. Still available.

[191052437]

you are still selling this thing?

[2kwik2c]

Yep! She's still available.

[dviry]

I am still waiting for shipment costs.... Unless you don't want to get rid of it (I guess it's been sitting on a shelf for 5 months??)

[2kwik2c]

I am still waiting for shipment costs.... Unless you don't want to get rid of it (I guess it's been sitting on a shelf for 5 months??)

Shipping cost to your area is $15. Sorry for the delay.

[2kwik2c]

SOLD