View Full Version : Wrong Part?
Im assembling the tail control arm, in my 600nb1c bag there is supposed to be 4 washers, 2 m3 washers and 2 small washers. In my bag I have 4 m3 washers and no small washers for the tail control arm. Whats going on?
TheBum
02-08-2008, 11:40 PM
They are really tiny, so make sure they're not inside some of the other parts. I had trouble seeing them at first. If you look on the next page of the manual (page 11), you'll see where the other two M3 washers are used.
Thers 2 m3 washers and 2 small washers, I ended up taking the 50h022-2 part #103 3x4.8x0.3mm washer from a bag further down the assembly from the tail installation(bag 600NT2C).
Where do I order this washers from and since it didnt come w/ my kit as a mispackaging can the company get me this? But that would probably take too long, I rather just order them.
captcasper7
02-09-2008, 04:10 AM
I found mine in the spare bits bag, the one with the tie wraps in it.
aussiemick
02-09-2008, 05:46 AM
I found mine in the spare bits bag, the one with the tie wraps in it.
Mine were in the spares bag too. But I didnt go looking in there till the build was over. I got the little tiny washers out of my 450 spares.
Mick
invertmast
02-09-2008, 09:52 AM
I found mine in the spare bits bag, the one with the tie wraps in it.
+1
Yeah found it thanks, that saved me time