View Full Version : Anyone using 9252's on 6V?
helibusa
06-07-2005, 10:05 PM
I've used 9252 with 5.1V longterm. Anyone used 6V with 9252's longterm?
I noticed on the Futaba site the 9252 shows N/A for 6V on the 9252. What does that mean? Thanks in advance.
capebob
06-07-2005, 10:41 PM
I noticed on the Futaba site the 9252 shows N/A for 6V on the 9252. What does that mean? Thanks in advance.
Futaba does not recommend use at 6V.
Bob
fitenfyr
06-09-2005, 12:24 PM
I am flying mine on 6v regulated.
Just started a few weeks ago and only have a couple tanks through them.
So far I have not seen any issues. They are not getting hot to the touch or any other external adverse effects, but time will tell.
I am using the Fromeco Arizona regulator on them.
cdrking
06-09-2005, 08:51 PM
So what if I want 5.1 volts all around, what does Fromeco have?
Jeff
fitenfyr
06-10-2005, 02:28 PM
Same reg Jeff you just dial down the servos to 5.1v's
You can fly my Fury at Brooks and check out the regulator.
I think you will like it on 6v's :D :D
Shortman
06-21-2005, 12:22 AM
It's kind of confusing how Futaba rates their servos. A fully charged 4.8V Nicad or NiMH pack will show 5.7V and slowly wear down to 4.8. At 6.0V regulated it seems to me the extra voltage shouldn't be a problem, however not using the futaba digitals I have never had a problem running 6V on ANY Other brand digitals be it, JR or Hitec.