View Full Version : Mini titan Jesus bolt
OHIOBOWHUNTER
02-10-2008, 10:24 PM
anyone got a part # for the jesus bolt ? I bent mine and cant seem to find it in any listings...the main shafts (2 in a pac) only come with the auto gear bolts:arggg:
haf4046
02-11-2008, 10:03 AM
HMC2-14B, pg 10 of the manual.
OHIOBOWHUNTER
02-11-2008, 10:41 AM
thanks ,but thats a kit reference # , a replacemant # would start with pv..:(
haf4046
02-11-2008, 11:14 AM
Its part of the socket screw pack.
OHIOBOWHUNTER
02-15-2008, 07:25 PM
Its part of the socket screw pack.
dang ! it wasn't in there.. anyone else got any ideas:arggg:
I wonder if this isn't an over-site by thundertiger to make this available ?:confused:
cmb2003svt
02-16-2008, 11:04 AM
According tot he manual:
PV0775 - Socket Screw M2x14 - Parts No HMC2-14B
PV0781 Parts Bag is the Hex Nut M2 - Parts No HML2
I would think any HS would have the M2x14 bolt & Nuts or maybe HomeDepot or Lowes.
cmb2003svt
02-16-2008, 11:09 AM
http://www.helidirect.com/product_info.php?cPath=288&products_id=4523
trebor_q
02-21-2008, 08:18 PM
PV0775
Socket screw(20), M2x14
PV0234
Nut(20),M2
PV0704
2 x main shaft (BK1051)
2 x socket screw, M2x14 (HMC2-14B)
4 x hex nut. M2 (HML2)
Keep flying...:fly
dynodude
02-22-2008, 12:15 PM
Hate to state the obvious, but have you thought of just cutting down the auto bolt to fit. Actually, you don't even have to cut it. Even though it is a little longer, it will work fine.:YeaBaby:
OHIOBOWHUNTER
02-22-2008, 04:40 PM
Hate to state the obvious, but have you thought of just cutting down the auto bolt to fit. Actually, you don't even have to cut it. Even though it is a little longer, it will work fine.:YeaBaby: my only concern was the fact that the Jesus bolt is a shouldered type bolt and the auto bolt is just threads, but I got hold of customer service at ace and the guy said to use the auto bolt as they don't have the Jesus bolt as a replacement , seems kinda strange that they would bother with the Jesus bolt in the first place if the other is good enough :thinking
dynodude
02-22-2008, 08:21 PM
As long as they are the same grade, it won't matter. If it matters, though, check out microfastenrs.com. They have a huge selection of 2mm bolts in lengths to 25mm, shouldered and non, in grade 12.5. Also, they sell in small quantities, and have fast shipping and great customer service.