Scale help

[Nism0]

I have a esky belt cp and wanna know which scale fuse would be best?

Looking to go for a huey or a blackhawk. Whichever works better.

Does anyone know of a fuse that would work or at least which scale i should be looking at?

[Darthdrk]

They are both good candidates for the belt CP
People think by looking at the pictures that these are micro helicopters because of what they see for a tailrotor. yes, its a tailmotor off the micro helicopter, the AXE CP to be exact. The Tailmotor works great on the 450 size bodies

[Nism0]

Those look pretty awesome!

How would i get the tail motor to work on a ready to fly belt cp? Or would i need to change electronics?

[Darthdrk]

You will need the tailmotor housing for mounting the tailmotor from a micro helicopter and I do recommend a high authority tail motor like that on the AXE CP. You will need a ESC for the tail motor (8-10 amp) and you will have to do a little simple wiring and soldering. (The duct fan motors for the EDF 40 and 50 should also work and they are a bit cheaper than the AXE CP tail motors)
You will loose the stock tailboom and taildrive components.

[Nism0]

Sweet, thats not too much work.

The blackhawk is my first choice, and i figure it will take a little more work than the huey.

I would get both but I only have one belt cp :)

Thx darthdrk