View Full Version : Mx400/450 eccpm with hs65hb help
olds455
02-12-2008, 01:25 PM
Has anyone installed these on this heli? This is what I came up with after watching the finless videos. the balls are on the first servo are at 11mm. Im not able to put the ball on the under side of the servo arm because at 11mm it interfears with the top of the servo. If I move it to the next holw it moves the to far under the swash. Any help and or pics would help me greatly, thanks
Raven_darkcloud
02-13-2008, 06:46 AM
Flip the ele servo and mount the others from the inside of the frame.
KITEPILOT
02-13-2008, 04:08 PM
Im using some simple HS 55 and didnt have any problems even with the arms.... but servo install is the hardest part of the whole model, otherwise everythings a piece of cake
istandalone
02-14-2008, 04:59 PM
you almost need some ky jelly and a shoe horn to wedge the servos in these things. but yes if you mount the servos on the opposite side of the frame that they're on now, you should be golden.
KITEPILOT
02-16-2008, 01:06 PM
Has anyone installed these on this heli? This is what I came up with after watching the finless videos. the balls are on the first servo are at 11mm. Im not able to put the ball on the under side of the servo arm because at 11mm it interfears with the top of the servo. If I move it to the next holw it moves the to far under the swash. Any help and or pics would help me greatly, thanks
partner, the rods shouldnt be at that much of an angle meaning youll have to mount a couple from inside the frame which means spliting the front of the frame "removing some screws" you want the rods to be verticle