I dropped my 14MZ

[helinovice]

it dropped about 2ft and broke switch SF and bent switch SE

should i send it in for a check-up?...if so, where, im in Aust

Cheers,
Frustrated

[DavidH]

IF the transmitter powers up and works. Then no reason to send it in. You can get replacement switches and change them yourself. You will have to get the switches from a Futaba dealer of authorized service center.

David

[MZFAN]

Hi,
If only switches (check sticks) are physically damaged then just change them. 14MZ have optional switches that you can easily change yourself. In your case it is really convenient.
You will need the 2 position long switch ref. BT2282 (number 8) to change F switch and the 3 position short switch ref. BT2283 (num. 2) to change E switch. You just have to order and wait...

[helinovice]

Cheers DavidH and MZFAN, thanks for your help

[tkilwein]

Tower hobbies here in the states have them. I ordered a few different ones for my tx.
You can get with or without the PCB board on.

[helinovice]

Cheers tkilwein, i will need the pcb's too, just to be safe