Dood
02-14-2008, 01:03 AM
Im trying to set my throttle hold position.
Ive adjusted the end points on the throttle channel, to match the fully open and fully shut positions on my carb.
Via the throttle curve in NORMAL, I've set low stick at 12%, for my idle speed.
Here's where things get complicated.
Throttle Hold position values go from -20% to 50%
Those values seemingly have nothing in common with any other numbers on the radio.
You'd think that 12% on throttle hold would equal 12% on your throttle curve.
So, trying to set the idle position, I found that even -20% on T-Hold is a higher open position than than 12% on low stick.
What am I doing wrong here?
How can I set my throttle hold position to a useful value, and one that makes sense?
Ive adjusted the end points on the throttle channel, to match the fully open and fully shut positions on my carb.
Via the throttle curve in NORMAL, I've set low stick at 12%, for my idle speed.
Here's where things get complicated.
Throttle Hold position values go from -20% to 50%
Those values seemingly have nothing in common with any other numbers on the radio.
You'd think that 12% on throttle hold would equal 12% on your throttle curve.
So, trying to set the idle position, I found that even -20% on T-Hold is a higher open position than than 12% on low stick.
What am I doing wrong here?
How can I set my throttle hold position to a useful value, and one that makes sense?