I need replacment balance charge connectors

[BlackTitanium]

I have a couple of damaged balance charge connectors on a couple of 3s Flight Power Lipos.
Anyone know of a source to purchase replacement connectors?

[philiusm]

I had the same problem last week. I bought a spare set of leads that go between the lipo and the balancer and used the connectors from them. You have to gently lever off the white bit on the lipo end of the cable and then you are left with suitable replacement connector. I just cut this off leaving a couple of inches of wire. I then cut off the connector on the lipo and soldered the replacement back on. I did one lead at a time on the lipo to avoid any nasty short circuits and used heatshrink to insulate the joints.

Seems to work OK.

[RC Accessory]

I have a couple of damaged balance charge connectors on a couple of 3s Flight Power Lipos.
Anyone know of a source to purchase replacement connectors?

We have the in stock.

http://www.rcaccessory.com/index.asp?PageAction=VIEWPROD&ProdID=245

[BlackTitanium]

What I'm looking for are the raw materials, so that I can crimp the wires and rebuild the connectors.