Hex driver size for set screws?

[surgicalCFe]

What size hex driver is needed for the set screws that hold the fly bar in place? 1.5mm is quite a bit to big and thats the smallest I have.

[surgicalCFe]

Its .89mm. So, if you ever need to replace the fly bar you will absolutely need to have a hex driver of this size. Smallest that I could find locally at Sears, Ace Hardware, etc.. was 1.5mm so I had to order a set of hex drivers on the net to get what I need.

[Buzzkill]

Thanks for the information thats good to know. I hadn't even noticed it was set screws.

[CompuFoil]

I ended up buying a 1mm hex key and with a few swipes on a diamond hone on each face, I it it to fit nicely. In fact, since it is a bit tapered, it fits nice and snug.
Eric

[xrbcoronalogoflyer]

just want to chime in and say that i've learned a lot from this sub-forum...my gaui200 from readyheli should be in my mailbox this week...i'm having a lot of fun with my esky hbk2, but wanted to treat myself to a more precise heli...btw, this tool set should have the hex wrenches necessary to do maintenance on the gaui200 (i have the bigger $38 version)...ken

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXGDP9&P=FR

[manike]

just want to chime in and say that i've learned a lot from this sub-forum...my gaui200 from readyheli should be in my mailbox this week...i'm having a lot of fun with my esky hbk2, but wanted to treat myself to a more precise heli...btw, this tool set should have the hex wrenches necessary to do maintenance on the gaui200 (i have the bigger $38 version)...ken

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXGDP9&P=FR

Thanks for that! I just ordered a set. :cheers

[rstacy]

Its .89mm. So, if you ever need to replace the fly bar you will absolutely need to have a hex driver of this size. Smallest that I could find locally at Sears, Ace Hardware, etc.. was 1.5mm so I had to order a set of hex drivers on the net to get what I need.

My LHS had a one. Apparently it is pretty popular with the car guys.

[surgicalCFe]

My LHS had a one. Apparently it is pretty popular with the car guys.

Wish mine did lol, I searched the entire store and had those working there search as well and couldn't find it. Its cool though, got a nice set coming in the mail that has .71, .89, and 1.3mm along with the rest of the standard sizes.

[choppersuey]

if you have a nightranger 2 from venom the hex wrench that comes with it is same size

REEDIT:
Wrong!! I miss read first post sorry , the one i mention is for other set screws on Main shaft spacers.

my apologies