Egg wisk.......!

[Degzie]

Do any of you guys get this happening....?

When I am hovering and I punch the pitch to max the tail spins (with torque reaction approx 180 degrees) until the servo catches up then its OK, approx .5 of a second, its like the tail is not being held by the gyro. This happens inverted just the same...!

Anybody else get this? Anybody any inputs ?

Thanks in advance.

I have tried to turn the gyro gain up but the tail starts wagging in the hover like a puppy dog. :arggg:

[RCMADHELI]

What kind of Gyro are you using? Heading Hold?

[Degzie]

I'm using the CSM 200 LW HH & a HS-50 servo.

[RCMADHELI]

So it's a Heading Hold Gyro, make sure you have your REVO mixing all set to 0%. This is the first thing that springs to mind.

If that doesn't solve the problem have a look here:
http://www.raptortechnique.com/gyrohowto.htm the CSM 200 isn't listed but maybe you get enough support from this very informative website.

Or have a look here, similar question with some replies from other forum members: http://www.runryder.com/helicopter/t181085p1/

Tom C (member on that forum) uses a CSM 200 LW in his shogun as well, he may be able to help you out further.

Good luck and let us know whether this helped you solve the problem.