Hurrican 200 and Futaba 9C

[Teknoid]

Hello. If anyone is running a 200 with a 9C, could you please post your settings. IE pitch curve and gyro settings.


Any help would be greatly appreciated.


Thanks

[xrbcoronalogoflyer]

hi tek...i'm looking for the response too...but in any case, i intend to copy my hbk2 (normal, idle 1 and 2) to the 200 when it arrives this week...should be no problemo to set it up and fine tune the settings ...i use my 9chps to fly a stryker, coupla raptors, coupla logo10s, and the hbk2...if i see that you're still interested after i finish my 200, i'll get back to you, but i suspect that you'll have it dialed-in by then...ken

[Jafa]

The gyro settings wont help you - they are specific to the gyro and tail servo and tail horn ball position

I've just got my Gaui200 to the point where it's ready for a test flight (using 9CHP)
I'm just going to use standard curves to start with
Hold and normal pitch curve 25 38.5 50 75 100
Idle up pitch curve is linear 0 25 50 75 100

Will have to see how the headspeed goes for the throttle