View Full Version : newbee requests suggestions for controller to go with Phoenix sim software
heli-jack
02-18-2008, 08:25 PM
on their website they have some drop -down choices for adapters.
Also please advise what would be a good controller to buy so i can use it in the future.
Today i used the controller that came with the 3.5 G -- it did not quite like it.
any suggestions are most welcome
thanks
bgagnon
02-19-2008, 08:58 PM
Hi Heli-Jack,
If you plan on going with a real heli soon I suggest you buy your Transmitter now and use it. Nothing like the real thing. As far as transmitter, I have my preference like everybody else on this forum :hug: but JR, Spektrum, Futaba... Your choice really.
HTH,
heli-jack
02-22-2008, 03:02 PM
The phoneix sim does not come with controller and i was wondering if i should just purchase Real flight G4 as it comes with a controller too.
OR if you think Phoenix is definitely superior then please suggest a controller simillar to what is packaged in the realflight G4 box.
Your thoughts between the above 2 sims are greatly appreciated.
I will however paln to buy Futaba 7C 7-Channel 2.4GHz FASST System in the near future.
thanks
http://www.helifever.com/forums/images/styles/helifeverforum.com/misc/progress.gif http://www.helifever.com/forums/images/styles/helifeverforum.com/buttons/edit.gif (http://www.helifever.com/forums/editpost.php?do=editpost&p=32340)
teeson
02-27-2008, 11:09 PM
ya unfortunately pheonix does not come with a controller, which really annoys me. im buying G4 cuz i like the feel that controller has, and i need a controller. if i had it my way, pheonix with G4s controller. i wish realflight sold seprate controllers... does someone have one (G4s?)
Pinecone
02-28-2008, 08:51 AM
You can't use the G4 controller as it doesn't out put the proper stuff for Phoenix.
You can pick up a cheap 4 ch Tx off of eBay for some $50. Esky or similar. You need one with a trainer port. Some are sold with the free copy of FMS, which since FMS is ffree anyway, not a big deal. But it does tell you that the Tx has a trainer port.
You can also use the Tx that comes with RTF helis like the Blade CX/CX2, Blade CP (not the best choice as it is pre-mixed CCPM). And those that come with RTF planks.
heli-jack
02-28-2008, 10:02 AM
You can't use the G4 controller as it doesn't out put the proper stuff for Phoenix.
You can pick up a cheap 4 ch Tx off of eBay for some $50. Esky or similar. You need one with a trainer port. Some are sold with the free copy of FMS, which since FMS is ffree anyway, not a big deal. But it does tell you that the Tx has a trainer port.
You can also use the Tx that comes with RTF helis like the Blade CX/CX2, Blade CP (not the best choice as it is pre-mixed CCPM). And those that come with RTF planks.
Thanks very much. That clears up a lot of things for me. Actually i am planning to buy a cornona trainer heli and i think the Tx comes with it. But there are so many combos of it anything from $200 to $500 -- its really confusing. I am going to have to re-read Toshiyasu Morita's info once again.