need help dx6 mixing

[Jetskeeter]

Hi, I am having some sort of problem programming my dx6 for the collective servos. I have the pitch servo, aileron servo, and elevator servo working in the right direction but the swash is moving down in the wrong direction when I increase the throttle. I then reset the CP mixing to -60% instead of 60% for the 3 mixing points and then the swash moves in the right direction but now it makes the servos move in the wrong direction for the elevator. It was working right the last time i used it. What am I doing wrong.

[Jetskeeter]

I think I figured out what the problem. the settings were not being saved when I turned off the tx. I think what I gotta do is hold both the increase and scroll buttons and and exit the sub menus before I turn off or go to another top menu. I'll have to experiment with this. Does anyone know the right way to get the settings to stick and be saved in memory?

[teamcompton]

On the DX7 you have to re-bind after making settings before turning the tx off. This was covered in the manual for my DX7, I was having the same problem. Hope it works for the DX6.

[outhouse]

http://www.digimemphoto.com/guides/backguide.htm

this will fix your problems