View Full Version : S9452 Servo
Moreflying
02-19-2008, 01:15 AM
I'm wanting to know if this servo will work with the 401 on the tail. Thanks.
brgsstm
02-19-2008, 04:55 AM
great on the cyclic, not sure about on the tail though. Best off with a 9254 on the tail.
Tom
Moreflying
02-19-2008, 09:53 AM
Thanks. I'll take a look at the 9254.
Moreflying
02-19-2008, 10:03 AM
$110 US. pricey little servo.
BarracudaHockey
02-19-2008, 11:43 AM
Most people buy the combo a 401 w/ 9254 is 185 bucks at Rons or Heliproz
Moreflying
02-19-2008, 11:42 PM
So the 9452 won't do the job on the tail then I take it.?.Any more thoughts?. Thanks..
brgsstm
02-20-2008, 06:07 AM
So the 9452 won't do the job on the tail then I take it.?.Any more thoughts?. Thanks..
the 9452 is slower than the 9254 but has greater torque. The 9254 is faster which is what you want for the tail.
Also running a tail servo at 6v will put a lot of load on it cos the tail works a servo real hard. Running a 9452 on 4.8v will make it even slower than it would be at 6v (when it is still slower than the 9254 at 4.8v)
Tom