Customised Logo 460 3D Series

[jyheli]

What do you think of this ?

My Customised Logo 460 3D Series.
It is heavy, but then agin throw in a Scorpion motor capable of 1500Watt would compensate for it. Stil using full size servos with Hitech 5975 and BLS251 with spartan. MAH 463 and funkey tail blade. It uses Guai Hurrican belt 572XL and cut down boom. Fly well with great cyclic. Still working out the power system but I know I need flybarless and trim down the weight.....only if VSTABI is not so difficult to configure and get the tail right
Waiting for the next easier flybarless system.

Fly well enough that I sold my Trex 500, which fly good. But nothing beat an Mikado Logo, and now I have the right size Mikado Logo.

Jonathan

Logo 460 3D specification
Rotor diameter : 1106mm
Rotor blades: 463mm
Main gear ration: 10.4:1 - Mod.0.5
Weight:2240g
Battery: 6S Lipo Kong Power 3200mah


Logo 500 3D specification
Rotor diameter : 1150mm to 1190mm
Rotor blades: 500/520mm
Main gear ration: 8,7:1 to 12.8:1 - Mod.0.5
Weight:2kg and up
Battery: 5S to 6S LiPoly

Logo 600 3D specification
Rotor diameter: 1250mm to 1450mm
Rotor blades: 600/620/650mm
Main gear ratio: 8,1:1 to 12,9:1, Mod. 0.7
Weight: 3,2 kg and up
Battery: 6S to 10S LiPoly

[Big Fil]

:Pics

[jyheli]

picture added

[Big Fil]

:thumbup:

[Voodoo]

yeah, COOL CANOPY :)

[OICU812]

The size porportion is off though, kinda like the Dinoco chopper from the show "Cars". :) Good on you for trying it though and if it works for ya then cool.

[Ticidytoc]

Still working out the power system but I know I need flybarless and trim down the weight.....only if VSTABI is not so difficult to configure and get the tail right

Send me your heli, I will configure it and make the tail work right, then I'll send it back to you. :thumbup: