B6x Reg mounting ?

[kaotickc]

How are you guys that have one of these mounting it in your Raptor?
Pics would be great! Also, does the stepdwon go before the gyro(401) or in between it and the servo?

Thanks
Derek

[ghtracey]

How are you guys that have one of these mounting it in your Raptor?
Pics would be great! Also, does the stepdwon go before the gyro(401) or in between it and the servo?

Thanks
Derek

No pics handy, sorry. I taped and strapped it under the front tray with the remote on the side visible in flight. (I have the 2 in 1 with glow igniter). The stepdown goes before the gyro.

[kaotickc]

No pics handy, sorry. I taped and strapped it under the front tray with the remote on the side visible in flight. (I have the 2 in 1 with glow igniter). The stepdown goes before the gyro.

Ok, the 2n1 has the heatsink on the top correct? The kind of issue I am having with this one is that the heatsink is on the bottom...so it really doesnt leave me with alot of options.

[jiberjaber]

I mounted a old Trex 450 battery mount to the raptor frame on my Titan, then attached the regulator to that.
http://www.trextuning.com/images/IMG_0192.jpg

http://www.rcheliaddict.co.uk/gallery/data/599/medium/DSCF1028.jpg

The switch and led's are mounted on a small bracket I made from ally attached where the upper tail boom support mounts are.

http://www.rcheliaddict.co.uk/gallery/data/599/medium/DSCF1030.jpg
http://www.rcheliaddict.co.uk/gallery/data/599/medium/DSCF1035.jpg
The battery is under slung below the receiver.

http://www.rcheliaddict.co.uk/gallery/data/599/medium/DSCF1031.jpg