Idle up not working

[Bobcoheli]

I have a DX7 and today I went to hit the idle up and my head speed went down......what the hell, I have no INH thro. curves are 25,50,75,100 in both modes (1 and 2), and with 50% thro input and heli grounded ( no flight pack) my swash does move down like its supose to do, what gives?:thinking

[N11634]

The reason your throttle's not responding correctly is because once you put negative pitch on the blades, you need MORE throttle, not less. Your curve should be shaped like a "V" in your idle-up mode. For example, if your normal mode curve goes 0-25-50-75-100, then your idle-up curve should be 100-75-50-75-100 so that when you flip it over, you're still putting throttle into the blades, which are now loaded from the opposite side is all.;)

[Bobcoheli]

He,he, he, he, he, :oops::oops:
OOOOPPPPSSSSSS!
I went through my radio settings and found that my thro. curve for my stunt modes 1&2 were not set.....he,he,he,he....I fixed it:arggg: