darkfa8
02-21-2008, 04:21 PM
ok, nose turns right when giving a quick positive pitch input.
Setup:
Mini Titan - stock head/stock tail (+10/-10) (Align Trex450SEV2 fiber tail blades)
cyclic: hs65mg
gyro: hg5000/hsg5083mg servo
scorpion hk2221-10
jazz 40-6-18
headspeed ~2900rpm
gyro gain (75% in TX) (50%-100% TX gain = HH mode)
This was on a freshly charged pack, tail trimmed out very well in rate mode.
Tail servo ball is 8mm out from the servo output shaft center and I get full travel on the tail pitch slider. EPA are maxed at 140/140 as per the gyro intructions.
now what?
Setup:
Mini Titan - stock head/stock tail (+10/-10) (Align Trex450SEV2 fiber tail blades)
cyclic: hs65mg
gyro: hg5000/hsg5083mg servo
scorpion hk2221-10
jazz 40-6-18
headspeed ~2900rpm
gyro gain (75% in TX) (50%-100% TX gain = HH mode)
This was on a freshly charged pack, tail trimmed out very well in rate mode.
Tail servo ball is 8mm out from the servo output shaft center and I get full travel on the tail pitch slider. EPA are maxed at 140/140 as per the gyro intructions.
now what?