FLYSKY Chineese controller FS-CT6A

[acarste622]

Just wondering if anybody has any information on this controller? I am new to the Heli Hobby and trying to set everything up. It is a 2.4Ghz controller and I am in the need of any setup instructions and apparently there is software to setup the controller itself. I found one place that sells the controller, but want to charge me like $70 for a manual and software, tried the manufacturer but nothing yet. And the company i got it from...well havent heard anything in about a month from them...

[DavidH]

Sounds like a radio that came with one of the many Chinese clone E helis. I have never even heard of it. Don't know why a company would want to sell software to set up a controller. I would box everything up and return it for a full refund.

David

[millipede]

I had the same problem. Fortunately, I have managed to get the manual and software for free. I guess you get what you pay for. I think this will be my last RTF model.
If you still need the manual and software, let me know.
millipede@aol.com

Keep flying

Rob

[Lucharez]

Hi you can download FS-CT6A Driver + Setup software from those links:

Software:
http://www.bmi-models.com/download/t6config.exe

Driver:
http://www.bmi-models.com/download/PL-2303%20Driver%20Installer.exe

Enjoy!
Lucharez

[jroberts]

I have one of these radios, but my cable isn't functional. I have the software and driver but can't access the radio. Does anyone know where I can purchase a new cable?

[krush]

I got this controller and got the utility to work and can see all channels on the on screen graph

I'm wondering is there anyway to interface this controller to use it with an RC sim?

[dditch66]

I just got in an RTF kit w/ a Flsky Tx.
In the software provided, I can save my config. But if I close the T6config program, then open it back up and then open the file I saved, some of the data is not saved. It will not save the knobs, switches or type (acro/heli).
I'm doing this w/ the Tx not plugged in.
Does this happen to anyone else?

[Wayshwing]

Hey dditch,

You have to save the settings in sequence or else they dont get saved correctly to the tx.

Turn on your transmitter, and plug it into the USB cable. Make sure to set the COM port to the correct one for your radio.

1. Program the tx to your liking, using the t6config software.
2. SAVE the program to your computer, with a unique filename.
3. OPEN the file you just saved.
4. Click the "GETUSER" button, to allow the radio to communicate with t6config software. This "syncs" the program on the screen with the program in the radio memory. Test the functions to be sure.
5. SAVE the program again.
6. Unplug the radio from the cable.

The program should now be saved in the radio. To make sure, turn the radio off and on, close and open t6config, reconnect the radio to the PC, set the COM port, click GETUSER, and test it. All settings should be functioning as saved.

Hope this helps! :thumbup: