The_Russian
02-22-2008, 04:59 PM
Lately I have been experiencing some tail wag on my B400. At the same time my heading drifts to the right at almost all times during flight. I have stock parts and settings for the tail and have checked the adjustment of the belt.
What now?:dontknow
sokal
02-22-2008, 05:34 PM
turn gyro gain down past 50 to verifiy that the tail pitch slider is center of travel
also i would recomend taking all rudd subtrim and trim out and adj the rod only
servo arm should be 90 out from servo pointing twards boom.
after you verify that all is set right gain back up to 64-66 and check
if it still drifts adj the rod not in the TX for me that work great
also make sure your gyro channel has 0 subtrim and 100% end points rudd is ok at 90% both ways