View Full Version : FLITEPOWER EVOLITE
bladetracker
02-22-2008, 06:19 PM
i have a trex 450 v2 that i want to run on 4s. 1107/2y new motor. concerend about weight, should i get, 2100mah or 2500mah. 185g - 236g. thank you.
aaron07
02-22-2008, 11:10 PM
I have the new FP 14.8V 2100 20C Evolites V2's. They actually weigh 200-210g, instead of what is advertised 185g, which is a considerable weight difference (20g). With that being said, I would not recommend the 2500, because anything over 210g will affect the nimble characteristics of the Trex 450. Also, I had to place my jazz 40 6 18 on the side of the frame above the rear skid in order to balance the 205g pack. With your Neu motor combined with a 4S 2100 evolite, you will probably get enough flight time anyway (7-11mins depending on headspeed and flying style). The extra weight from a 236g pack will be noticeably nose heavy, which isn't a good trade off for a few extra minutes flight time. Thats only my opinion though.....
bladetracker
02-23-2008, 10:09 AM
thx aaron07. who did you buy them from. have the jass also, how do you like it and what is your throttle curve. it should just be flat, right.
Pinecone
02-24-2008, 09:07 AM
With 4S you can also drop down to smaller packs, like 1700 - 1800.
aaron07
02-24-2008, 09:03 PM
I got my packs from Flight Power directly. Do a search on Ebay for Flight Power. Throttle curve was flat: 2800 / 72%, 3100 / 85%