View Full Version : Battery for circuit RX. mA?
enry74hh
02-23-2008, 04:01 AM
I am buying components for Logo500 3D
AR7000
V-Bar
3x JR8717 (directly to 7.4V)
1x JR8900 with Spektrum VR5203
How many mA must have the battery?
I would be oriented for FP EvoLite 2S 1350. It may be sufficient EvoLite 2S 800?
Consider that every 3 flights can recharging.
Thanks.
Mercuriell
02-23-2008, 04:09 AM
Either of those would do fine - count on around 150mAh per flight and you want to have at least 50% reserve so the 1350 would be a safer bet unless you are counting every gram in which case the 800 would give you 3 flights.
OICU812
02-23-2008, 04:11 AM
I run the FP 2S 1320mah and can safely get 5 flights.
enry74hh
02-23-2008, 03:54 PM
Ok, thank you for the information.
Enrico.
maybe i should fly softer, i have to charge my 1600 every 3 flights
Mercuriell
02-25-2008, 06:21 AM
maybe i should fly softer, i have to charge my 1600 every 3 flights
:WOWsomething sounds amiss there !
3x 8717 1x 8900G V-Bar and lots of crack maneuvers and pitch pumping!
Flybar-less
02-25-2008, 11:35 AM
It's the regulator letting out those extra electrons into the atmosphere.:YeaBaby:
Mercuriell
02-25-2008, 04:48 PM
It's the regulator letting out those extra electrons into the atmosphere.:YeaBaby:
Luckily we don't have that problem in the Southern hemisphere - something to do with the Corilolis effect :thumbup:
Team-MAYHEM
02-26-2008, 12:15 PM
3x 8717 1x 8900G V-Bar and lots of crack maneuvers and pitch pumping!
Something is definetly amiss...I have the exact same setup and get 6-7 flights