PDA

View Full Version : Need help! :)


ViperX35
02-23-2008, 10:14 AM
Hi,

I just got my Blade400 a couple of hours a go, and I caged the battery’s and was ready to try it out...
But when I was binding the radios something happened. I plugged in the bind plug on the receiver, connected the battery and did the bind procedure the Spectrum tells you to do in the manual, and every thing looked ok. But after it up linked I just tried the controls they worked fine for some sec but then the every thing went out. Can this be some thing that blown, a fuse or some thing?
Tried the battery agene but no response from any thing, the batt seams to be ok.

Any one have an idea so I can get to fly my 400?

THX
ViperX35

The_Russian
02-23-2008, 12:29 PM
Don't take it apart. Take it back to where you purchase it and get an exchange. This happened to my first B400 and they had no idea what had happened. I was hovering and it just quit right there. When I plugged it in, it was like the battery was dead. No beeps or buzzing.

Take it back!

sokal
02-23-2008, 02:44 PM
i would try to rebind
u may have to re-enter the setting
also does the esc beep
and a light on the RX if not the esc may be out
your RX get power from the esc unless u buy a BEC
or an RX BATT pack
but rebind and set up setting to stock config
and see if that takes care of it
but the faster and less stressful way is to return
if they dont have it in stock u will wait a week or so

The_Russian
02-23-2008, 02:53 PM
With this problem he doesn't even have power to bind the radio.

ViperX35
02-23-2008, 04:09 PM
I will get the B400 changed first tithing Monday, the store I bought it from is just a couple of min away and they have several on stock...
And as you say it no use trying to bind it agen, since I dint get any power at all, just like you say it has the same characteristics as a flat battery...


Thanks

--------------------------------------------------------------------------------------------------------------
ViperX35
Viper team Norway

T-rex 600E
Concept 46
Blade 400
Blade CX2
Lama 4

sokal
02-23-2008, 04:29 PM
so im guessing the esc is tost?
iv been conteplating a BEC

The_Russian
02-23-2008, 04:39 PM
That's what I thought, but I never found out what is really was.

sokal
02-23-2008, 04:45 PM
will keep in mind thanks