PDA

View Full Version : xtreme 180 on CX2


jmizoguchi
02-23-2008, 11:58 PM
Does anyone had issue with this motor far as quality? when I upgrade to this motor rudder trim is all the way left and gyro is all the way clock wise.. this tell me that motor is no spinning right to cancel out.

I have heard that XTREME180 had some issue lately .... I have to admit I have crashed before but this was pretty much from first when I changed motor.

I also had see hesitation on heli which things something in the motor on 3in1 in causing

what is the though on this?

rotorhead58d
02-26-2008, 09:20 PM
i had two different sets of these motors. i put my stock motors back in. nuff said.
:thumbdown:

jmizoguchi
02-26-2008, 10:58 PM
I have heard some quality issue.. is that true?

Glockaholic Drew
02-27-2008, 10:48 PM
You may need to adjust the gain/profortioning for the motors. Turn the motor adjustment clockwise to increase the speed of the "right" motor. Review your manual for a clearer description of the procedure. You may have to adjust the gain on the gyro as well.