TheIBF
02-24-2008, 06:13 PM
Lots of Full Size Picts Here: http://www.rcgroups.com/forums/showthread.php?t=823784 (http://www.rcgroups.com/forums/showthread.php?t=823784)
Trader Backed Out This Morning :( My Loss, Your Second Chance!!!!
My preference is to trade, I have WAY too much wrapped up in this to let it go too cheep. I am interested in a RTF Airplane, a larger Heli, Electric or Gas.
Here is what it is:
Blade CP + RTF
Full LiPo Sys : 2 LiPo batteries, DC Balance Charger, and AC Wall Adapter for Charger
Eflight Heading Hold Gyro!
Both Motors have Heat Sinks
Lots of Extra Parts New In Packaging (NIP)
Full Frame
Main Motor
Tail Motor
Tail Rotor Drive Gear set
Main Blade Set
Tail Blade
Paddle Control Fame Pushers
Bearings
More Extra Parts
2 Main Shaft & Gear Sets (in good working condition)
Training Gear (if needed)
Center Hub (never used, but out of packaging)
Spindle (for Head, very used but functional)
Tail Rotor Drive Gear set
Tail Blade (Chipped off 1 spin block)
2 Paddle Control Frames (1 perfect)
Swash plate (beat up, but good for spare)
Paddle Fly Bar
Landing gear ( beat up)
LOTS of Main Blades (Beat up, but most good for training)
Blade CX Tail Shroud ( Cut to get it on the CP, Just liked
The Look, but not good for flying)
Of course the TX (transmitter)
Some double stick tape it came with
And The Box & Manual
This is the Heli I learned to fly on. It was very tuff at first, then I learned how to set up the Main Rotors (I highly advise learning how to do this RITE AWAY to save some money on crashes) and put a Heading Hold Gyro on it. This tamed it down A LOT. You don’t often see this Lower price unit with a Heading Hold Gyro on it because the Gyro was almost as much as the Heli itself! But after I flew my first Trex with one, I knew it NEEDED one. Anyway, I now have 3 Trex 450’s and this Blade CP. Stuff needs to get changed up here. As you can see in the pictures there is a nose ding in the canopy, and I beefed up the Vertical Tail Support, I did this because I fly in my house, and it was always getting caught in the carpet when I was in a low hover. I am not claiming this to be in “Just out of the Box” shape… I actually flew the thing! But if you are looking for a great starter… It doesn’t get much better than this. Almost any spare parts you will need already here. BTW I had soooo many parts because I am one of those people that doesn’t want to go back to the hobby shop every time something goes wrong… I quickly found out that the parts I really need a lot of were the blades. If I were going to stay in this unit, O would buy a set of the TUFF Plastic blades. These wood ones have NO FORGIVNESS AT ALL. They chip VERY EASY.
If anyone out there with a Trex 500 or 600 size and looking is looking to go smaller fo indoors, I have this Blade, and like I said some Trex 450’s that I am willing to trade toward a 500 or a 600 + some money depending on your Heli's configuration.
If anyone wants more picts, just ask! TheIBF@Gmail.com
Thanks for your time.
Trader Backed Out This Morning :( My Loss, Your Second Chance!!!!
My preference is to trade, I have WAY too much wrapped up in this to let it go too cheep. I am interested in a RTF Airplane, a larger Heli, Electric or Gas.
Here is what it is:
Blade CP + RTF
Full LiPo Sys : 2 LiPo batteries, DC Balance Charger, and AC Wall Adapter for Charger
Eflight Heading Hold Gyro!
Both Motors have Heat Sinks
Lots of Extra Parts New In Packaging (NIP)
Full Frame
Main Motor
Tail Motor
Tail Rotor Drive Gear set
Main Blade Set
Tail Blade
Paddle Control Fame Pushers
Bearings
More Extra Parts
2 Main Shaft & Gear Sets (in good working condition)
Training Gear (if needed)
Center Hub (never used, but out of packaging)
Spindle (for Head, very used but functional)
Tail Rotor Drive Gear set
Tail Blade (Chipped off 1 spin block)
2 Paddle Control Frames (1 perfect)
Swash plate (beat up, but good for spare)
Paddle Fly Bar
Landing gear ( beat up)
LOTS of Main Blades (Beat up, but most good for training)
Blade CX Tail Shroud ( Cut to get it on the CP, Just liked
The Look, but not good for flying)
Of course the TX (transmitter)
Some double stick tape it came with
And The Box & Manual
This is the Heli I learned to fly on. It was very tuff at first, then I learned how to set up the Main Rotors (I highly advise learning how to do this RITE AWAY to save some money on crashes) and put a Heading Hold Gyro on it. This tamed it down A LOT. You don’t often see this Lower price unit with a Heading Hold Gyro on it because the Gyro was almost as much as the Heli itself! But after I flew my first Trex with one, I knew it NEEDED one. Anyway, I now have 3 Trex 450’s and this Blade CP. Stuff needs to get changed up here. As you can see in the pictures there is a nose ding in the canopy, and I beefed up the Vertical Tail Support, I did this because I fly in my house, and it was always getting caught in the carpet when I was in a low hover. I am not claiming this to be in “Just out of the Box” shape… I actually flew the thing! But if you are looking for a great starter… It doesn’t get much better than this. Almost any spare parts you will need already here. BTW I had soooo many parts because I am one of those people that doesn’t want to go back to the hobby shop every time something goes wrong… I quickly found out that the parts I really need a lot of were the blades. If I were going to stay in this unit, O would buy a set of the TUFF Plastic blades. These wood ones have NO FORGIVNESS AT ALL. They chip VERY EASY.
If anyone out there with a Trex 500 or 600 size and looking is looking to go smaller fo indoors, I have this Blade, and like I said some Trex 450’s that I am willing to trade toward a 500 or a 600 + some money depending on your Heli's configuration.
If anyone wants more picts, just ask! TheIBF@Gmail.com
Thanks for your time.