Head Spead & Throttle curves

[earetz]

Hi guys, I'm fairly new to electrics and got myself a mini titan with a Gyro/CCPM mixer in one with the ARF kit. Its a TG-6100M for anyone interested. It mixed the head speed with pitch curves and worked ok, but I have bypassed it now and just using the tg-6100 as a gyro. Thunder Tiger Manuals are currently not available on their websites. What throttle curves (roughly) should I be using on my dx7 as guide. Many Thanks for your time, cheers Ed

[ghtracey]

The manual is available from a direct link here (http://www.acehobby.com/ace/PDF/Heli/TTR4710.pdf) on the Ace Hobbies Mini Titan page (http://www.acehobby.com/ace/TTR4710.htm)

Throttle and pitch curves depend a lot on your setup. Pitch ranges can change depending on linkage, different motors and ESC's make different power, etc. I'm sure though, that you'll get some posts with guideline curves.

[randerson07]

I think im using something like 0-40-60-80-100 I might bump it to something more like 0-42-68-90-100 cause i want something a little higher.

I started with the what my B400 came as stock, then when i transfered to the Mini Titan I bumped them a little higher to something like what finless suggests and i tweek from there.

[heli77]

For basic hovering Im using the following. This setup gives my Heli a very neutral and stable feel.
Pitch cruve: 46-48-50-65-80
Throttle curve: 0-50-80-80-80

[earetz]

Many thanks for all your reply's. Cheers Ed.