Need P/N For Fury HD Push Rod Set

[lawrenmd]

Anyone know the part numbers for the HD pushrod set for the Extreme. The ones in the kit are really whimpy!. I think the Tempest Rods will work but I'm not sure.

Dave

[DavidH]

http://www.ronlund.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=heli&Product_Code=MA120-96

[Knud Pedersen DENMARK]

DavidH

The picture only shows the linkage from servo to Swashplate....
IS it possible to buy 2,6mm link for ALL the linkage on the rotorhead?
:?:
ChopperKnud

[DavidH]

http://www.ronlund.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=heli&Product_Code=MA120-25

http://www.ronlund.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=heli&Product_Code=MA120-96

The two above items will give you the 2.6 mm rods from the servos to the bell cranks and the pitch rods from the inner swash to the bell mixer.

That in my opinion is the only place the 2.6 mm rods is needed. The two millimeter rods are adqueate in the other places.

[ddavison]

Try #121-1 H.D. Rotor Head rod Set, Fury Expert/Extreme

[lawrenmd]

Thanks for the info guys, this helped!