Basejump
02-26-2008, 11:15 AM
What servo horn are you guys using.
The supplied ones are huge.
Also what distance hole with a 401.
HighNear90
02-26-2008, 05:01 PM
I've got the 6965 on my tail. I'm using the black single arm and using the hole closest to the output shaft. I have a GY240 and I have to use the closest so I don't get any binding on the pitch slider. The GY240 doesn't have limit adjustment, so you have to setup the travel in "rate mode" mechanically and then when you switch to AVCS "heading hold" you use the ATV/end point adj to set on the TX to set the piro rate.
Good Luck,
Leo