Which Benchtop Power Supply for 3 Hyperion Chargers.

[BoysToys]

I recently bought myself a couple of new chargers and now find myself with 3. All the better to get my helis back in the air quickly! I have two Hyperion EOS0610i's and one Hyperion EOS1210i. Now my little 18A Pyramid Power Supply is not cutting it. I am looking for one nice power supply that will power all three chargers at once. Each of the 0610s will push 250w and the 1210i is rated at 180w. I am looking at getting a Pyramid PS-52KX 40A, 800w continous charger with a variable voltage output up to 15V DC.

Right now I will only be charging 3 6s 2500 packs for my 500 at a time. However, I am planning on getting a 600 in the future and want enough power to charge 3 6s 5000mah packs at once. Will this power work or should I look at something else?

Here is a link to the Power Supply I am seriously considering. http://www.etronics.com/p-23878-pyramid-ps-52kx-regulated-adjustable-voltage-45-amp-power-supply.aspx

Or I could get a little smaller 35A 750W and run the two 0610s off it and keep the 18A 400w and use it to power the 1210i. http://www.etronics.com/p-23876-pyramid-ps-46kx-regulated-adjustable-voltage-40-amp-power-supply.aspx

I have also attached a couple of pics of my current setup with the inadeqate power supply.

Thanks for the help

[CHOPPER BOB]

as long as you are useing the 1c rule, 40 amps is fine, but their is a 50 amp model for a few $s more.

[tppjr]

http://www.iotaengineering.com/dls55.htm

You can find them on ebay for $100. I will be getting one of these soon.

Thomas