Clutch Assembly Drawing

[Henka]

Hi,

Is there anyone that know wear to find a drawing of the Clutch Assembly 122-44? I need to see a split print whit all the part numbers. The Clutch belongs to a Fury Tempest 3D.

/Henka

[DavidH]

The clutch driver comes pre assembled, so their is no drawing with part numbers that I know about.

Here are some of the parts
http://www.ronlund.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=heli&Product_Code=MA122-46


http://www.ronlund.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=heli&Product_Code=MA122-49

http://www.ronlund.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=heli&Product_Code=MA122-47


http://www.ronlund.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=heli&Product_Code=MA122-48

http://www.ronlund.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=heli&Product_Code=MA122-50

http://www.ronlund.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=heli&Product_Code=MA115-44

http://www.ronlund.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=heli&Product_Code=MA115-42

http://www.ronlund.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=heli&Product_Code=MA121-20

http://www.ronlund.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=heli&Product_Code=MA121-21

http://www.ronlund.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=heli&Product_Code=MA121-22

Hope this helps

David

[capebob]

There is a picture of the clutch driver assembly partially disassembled in the Status upgrade manual here:

http://www.miniatureaircraftusa.com/helicopterkits/1026_stratus/conversion_kit/stratus_conversion_instructions_r1.pdf

There are some good pictures of the assembly starting on pg. six.

Bob

[WillJames]

Thanks for the link to the manual Bob! That manual has got to be the best one I have ever seen. Tons of actual photos and layed out very well. Man that is great Carey!!!

Everybody should take a quick look at the link Bob posted above if you have not. Excellent!

[capebob]

You can say that again about the manual. I finished my Stratus conversion about a week ago and it was almost effortless thanks to the excellent work done on the manual. Way to go Carey!!! :clappp BTW the Stratus is also an excellent piece of work.

[Henka]

Thank you very much for the help! It will solve my problem!

/Henka