Hawk owners with the old CF TT conversion check it out.

[ThBrtmn]

For those that have a Hawk and have converted to the TT back when it was CF check this out. Now the TTs are made of SS so a replacement TT for the double dogbone ends (main output and tail input) is 29$ With the same ammount you can convert the Tail input to accept the way the Hawk pro uses a TT just by changing the tail input shaft(I think you realy might not have to do that. Remove the plastic Female end on the input shaft. Order the TT for 16$ and the collar to replace it for 10$ That way everytime you boom strike or crash and muck up the SS TT You are only out 16$ for the TT instead of 29$. Be sure to save your Bearing cups that go on the shaft. You will need those or need to order them.
Any Questions.

[Hotshot Charlie]

Hey Bart,

I have not converted my Hawk Sport, yet.

If you don't mind, Please give me part numbers, I would like to do this. Give me a list of everything I will need to do the conversion.

Thanks, and tell Siri and Zander hello !

[ThBrtmn]

Looking off the hawk pro manual starting on page 12
Itemized part list:
2-cnbb1350 output bearings x2
1-HW3059a output shaft and spacer
1-HI3154 TT coupler female end.
1-HW3063ts TT shaft
1-HI3065a TT bearing case/cup
1-CNBB816 TT cup bearing.
1-HI3065 TT collar
2-cnbb1350 Tail gearbox input bearings x2
1-HW3070a Tail gearbox input shaft

I looked at the Hawk Sport manual and those bearing part numbers are the same #s that shown in the maual(not the cup bearing) that come with the stock wire drive so you probably wont need them.
Price everything out individually and then price the whole conversion kit. If you havent converted to TT yet. It may be cheaper to just do the kit. But the TT will be cheaper by half in the end if you set it up like the Hawk pro.

[Rodney]

Bart Do you have any of those bearing cups? I need some to test on the new PMAX boom.

[Hotshot Charlie]

Cool Beans, Bart ! Thanks a bunch for your time and efforts. I think this would be a very good addtion for my Hawk Sport.

[ThBrtmn]

Sorry Rodney...I only had one that was on my last TT. I didnt order a new one with new TT. Century should have them. It looks like its not on the Web page yet. They had that same problem with the colar. I emailed them and asked if it was available for purchase and they said it was and that they had just overlooked adding it to the website. I bet its the same for the cup.

[Rodney]

Thanks, I will give Antonio a call tomm.