Helidirect Metal tail case won't work with gaui slider

[concept1]

I ordered the metal tail case from Heli direct and it's a real nice piece, but unfortunalty it is not compatible with the stock gaui slider and arm! or maybe just not the arm. now that I look at their arm online I see the offset is less the 1/2 the stock Gaui, so for anyone ordering this tail, you will either need the complete assembly or the case and the arm. I upgraded to the Raptor slider so I hadn't planned on getting the whole assembly.

[mjdee14]

This has come up before and they do state on the website that it only works with the CNC arm assembly, when I bought mine they even had a combo price for both items..

It's always good to remind people and maybe someone else will see this post and prevent them form having to pay for shipping twice.

[concept1]

Man, your right, if you scroll down it does say it won't work with the plastic arm!

[mjdee14]

Another one is their CNC elevator...it only works with their CNC elevator control arm, it won't work with the Gaui plastic or CNC bellcrank....the holes are different where they connect.

[bpd964]

Also, when you buy revco gears, you need to buy the proper pinion because the gaui pinions do not mesh correctly... I found that out the hard way.. And, sure enough, when you read the fine print, it tells you which pinion/pitch you need..