Trex 450SE parts, and other items for sale.

[inmidair]

ok folks. i was waiting to post pics of these items, but i figure everyone already knows what they look like.
but i suppose i can still post them if requested.


BRAND NEW ITEMS...

325 radix blades, never flown, with spacers. ok i lied i spooled them up once for a 4 min test flight. thats it!

phoenix-35 ESC, and programming cable. still in package, never opened.

325 CF hyperion blades. package opened but still new. nto the best blades but good for transitioning from wood to CF.

325 align red and white woodies. package opened but never flown. will check balance if requested.

i also have a bunch of other trex miscellaneous parts still new... align belt, gates belt, bearings, main gear hub, main gear one way, also a main gear (lol), black stiffie tail blades, and more!!

stock bottom tray and stock landing skids never used. got replaced right away.


USED ITEMS...

two EVO25's with about 10 flights on them. (i can get exact flight number from my flylog if requested) taken care of very well. no crashes. currently in storage charge mode for the past 5 months.

bantam BC-6 FP TP balance adapter.

align trex 450 carry case. a few minor dents but good condition. flashy large spectrum sticker by carry handle. ;)

5 different kinds of align flybar paddles. each different part number and weight.

i have a bunch of used mixed parts as well, hardware, old V1 parts, etc...


make me a offer i cant refuse!!!
if any question at all PM me. :)

[csclark990]

What are you looking to get for everything?

[inmidair]

to be honest im not to sure yet. im willing to throw all the miscellaneous parts in on the house if everything is bought at once for a fair price.

i would say around 160, but shipping is going to be a little high because of the size of the carry case so i will say 185 shipped.

packaged price...
considering the two EVO25's 25$ each - 50
align carry case - 30$
radix blades - 35$
hyperion blades and align woodies - 15$
phoenix ESC - 30$

thats 160$ plus all of the bottom items for 25$ (shipping estimate)

all spare parts- hardware, V1 head housing/grips, V1.2 swash plate (used), V1.2 tail blade grips, paddles (x5), tail blades (x3), belts main gear (x2), one way (V2), ball links, spare new bearings, 1set of thrust bearings (techmodel prduct), align pitch guage. align bottom tray/skids, motor heat sync, package of frame screws, package of spare V1 color bling, gates belt, align belt, swash leveler, true blood dampers (one set of V1 and one set of V2), spare tail drive belt pully, 1 hard one 13T pinion, and other spare hardware.

phew.. finally done.
oh wait, ...some good quality electronic thermal compound in a syringe that i got from work, 242 loctite brand thread lock barely used, green R48 almost gone (good for bearings), the FP TP BC-6 balancer adapter, a small new tube of lithium grease for thrust bearings, a new blank white plastic align V1 canopy still in package, a dinged up but functional V2 FG blue and green canopy, spectrum decals, align rex 450 V1 decals, one new V2 feathering shaft, one new 220mm V2 flybar, 2 mismatched spare align woodies, a spectrum TX neck strap, a align towel (i use for inside of carry case to protect TX from heli), and a duratrax flashpoint inferred temp gun.


oh yeah, and the align SE parts case that all the parts are sitting in! :lol:

what do you think?

i do not really want to part it all out. it is just going to be more expensive for me to ship. but if i decide to i will probably raise the individual prices.

[inmidair]

still available.

[inmidair]

willing to negotiate price.

[CagedVR6]

The Align carry case will my trex and dx6i fit ?

[stang2112]

Have you sold your parts yet?

[pcinc]

Sent you PM on the parts


Thanks,
Peter

[Helisin]

PM sent. No reply. :dontknow. I am interested.

[FlyingHigh 450]

to be honest im not to sure yet. im willing to throw all the miscellaneous parts in on the house if everything is bought at once for a fair price.

i would say around 160, but shipping is going to be a little high because of the size of the carry case so i will say 185 shipped.

packaged price...
considering the two EVO25's 25$ each - 50
align carry case - 30$
radix blades - 35$
hyperion blades and align woodies - 15$
phoenix ESC - 30$

thats 160$ plus all of the bottom items for 25$ (shipping estimate)

all spare parts- hardware, V1 head housing/grips, V1.2 swash plate (used), V1.2 tail blade grips, paddles (x5), tail blades (x3), belts main gear (x2), one way (V2), ball links, spare new bearings, 1set of thrust bearings (techmodel prduct), align pitch guage. align bottom tray/skids, motor heat sync, package of frame screws, package of spare V1 color bling, gates belt, align belt, swash leveler, true blood dampers (one set of V1 and one set of V2), spare tail drive belt pully, 1 hard one 13T pinion, and other spare hardware.

phew.. finally done.
oh wait, ...some good quality electronic thermal compound in a syringe that i got from work, 242 loctite brand thread lock barely used, green R48 almost gone (good for bearings), the FP TP BC-6 balancer adapter, a small new tube of lithium grease for thrust bearings, a new blank white plastic align V1 canopy still in package, a dinged up but functional V2 FG blue and green canopy, spectrum decals, align rex 450 V1 decals, one new V2 feathering shaft, one new 220mm V2 flybar, 2 mismatched spare align woodies, a spectrum TX neck strap, a align towel (i use for inside of carry case to protect TX from heli), and a duratrax flashpoint inferred temp gun.


oh yeah, and the align SE parts case that all the parts are sitting in! :lol:

what do you think?

i do not really want to part it all out. it is just going to be more expensive for me to ship. but if i decide to i will probably raise the individual prices.If you still have everything and your interested in trades I have 2 mini-lst trucks with alot of mods::insane 370 motors,3 battery packs(1 is a 3cell 11.1v 800mah lipo)metal diffs,locked trans ect...comes with alot of extra parts and 2 bodys.1 truck has all the mods on it and the other only has the diff up-grade.I let a friend use a rx/tx for his rc 18mt and he moved and I never got it back:mad: so I only have one radio.They both run awsome and there only a few months old.

[inmidair]

sorry for taking so long to reply guys. the parts are pending sale from a local customer.

sorry i do not have the time to individually reply to all of you right now.

thank you.

[inmidair]

i dont know why but i cant edit my first post to change the thread title to "sold". there is no edit option. guess you cant edit a post twice. :roll::thumbdown:
retarded.

[Helisin]

No problem.:) If the sale doesn't pan out then I'm still interested.

Rob