View Full Version : Is there any night and day difference between HBKv2 stock servo vs. HS55?
03-02-2008, 09:54 AM
Im planning to upgrade my stock servo for my honey bee king v2 because i got my DX7 and im trying to unleash all its potentials. With stock servo, will it give a much better performance? or it will work better on a digital HS55?
03-02-2008, 11:52 AM
The esky servo and the hs55's are pretty much the same mechanically.
03-04-2008, 07:45 AM
With the important difference being the HS-55's rotate in the opposite direction of the Esky servo, so you can't just swap one for the other without making changes in the radio. (Changes you can't do with the stock Esky radio!)
03-05-2008, 09:03 AM
I'm flying my HBKII with HS-55's and DX7. Never did fly this bird stock so I cannot report a difference. I will say this about the HS-55's, I fly them in my Walkera #4 FP machine and it made a huge difference from stock. Of course I'm not sure how much is servo and how much is tx. I think the DX7 is the big difference.
07-06-2008, 08:21 AM
im using hs55's with the stock TX you just have to reverse some of the internal wires, change the red and black wires from the motor over and the red and green wire from the outer pins of the potentiometer over and your sweet
heres a pic after changing the wires
any probs PM me
07-06-2008, 01:04 PM
I'm using 3 HS65MG's. It takes a bit of customization to make them fit right, but they're great cyclic servo's and super durable.