Muffler spacer?

[OzarkCopterBum]

I got a good deal on a KSJ 2 piece muffler for my OS 37. Unfortunately its going to rub the frame even if I dremel off the stiffeners and could stand to be a minimum of an 1/8" farther away and ideally 1/4" with no dremeling.

Is there such an animal available and where? Looked at Ricks and Heliproz and didnt see anything I recognized.

Any help is greatly appreciated!

[DavidH]

http://dubro.com/DUBRO2005CATALOG/images/DUBRO_RC_2005_Catalog_5C89.jpg

Dubro makes the above that might work. 1-7/16 inch spacing between the bolts.

http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXD638&P=0

Also they make stock to make your own exhaust spacer.

http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXD621&P=0

Here is some OS extensions, this one should work as it fits the OS 32

http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXCA80&P=0




David

[OzarkCopterBum]

Thanks David. The OS spacer looks perfect as I measured 35mm between the bolts.
Plus I need a few other piddly items at Tower too.

Thanks dude!