View Full Version : Gear ration : Can you confirm ?
ecofan_
03-12-2008, 05:06 PM
Hi,
I was just guessing that my Neu 1515-2.5D (1700kv) on 6S will not fit the l600, due to its too high Kv, even on 6S.
Does the logo require very low kv motors ?
thanks,
Nicolas
The logo main gear is 155t and the smallest pinion is 13t. If you plug these into a gear calculator you get about 2900rpm which is high.
K
LITHIUMSTATIC
03-12-2008, 06:18 PM
On 6s you will need around 1100kv in order to obtain the correct headspeed.
cptsnoopy
03-13-2008, 01:35 AM
I have not counted the actual number of teeth on the mod.7 HB gear but I was under the impression that it was 153 teeth. (just for more accurate calculations)
LITHIUMSTATIC
03-13-2008, 01:39 AM
I have not counted the actual number of teeth on the mod.7 HB gear but I was under the impression that it was 153 teeth. (just for more accurate calculations)
It is sir.:thumbup: