Upgraded to the 65MG's after striping stock servos in crash!

[14rcheli]

I had a pretty nasty crash and stripped 2 of 3 servos, no upgrade on gyro yet (even though it sucks). I decided to upgrade to the 65MG's, install was fairly easy and then I followed fins CCPM vids. Got the servos centered, swash level and made applicable changes to the DX6i. Flew it with similar settings for the swash mix and gyro as the stock blade. It flew okay.....my question is what are the best settings in my situation? Any help is much appreciatted!

[sokal]

the swash mix helps get the range desired

i set up with all ni 60

then adj from thier

set thro to hit the +10/-10

then put flybar over top of heli to check the aile limits move stick to full possition and adj
have mine set to were the flybar is a hair line from the blade grip
same in elev just position the flybar perpendicular

i have a bout +6/-6 deflection

[Carpman68]

Sokal dont u mean set the pitch in swash mix to hit + & - 10

i dont get what you mean about the flybar (did u mean perpendicular to the tail boom) ?

I have about 6` of deflection but using finless bobs way of setting didnt bother use pitch gauge

[sokal]

if you acuate the aile to one side while the fly bar is over the body the flybar control link contacts the blade grip same in elev this is the b400 deflection limit