Arming sequence ?

[swooper]

Hey guys whats up ? So my question is should the Rx, ESC and Gyro arm in certain order ? I've heard of people saying that they noticed the Rx arming after the Gyro and when that happened the tail didn't fly well. I always make sure, before I start the sistem, that my DX6i is fully down, throttle stick and all the switches (0 position), and every now and than I notice the Gyro arming first. When that happens I always turn everything off and initiate again, usually does it once or twice, than it does what I think is the right order : Rx first, than the ESC and last one the Gyro. What you guys think ? :arggg::smokin::YeaBaby:

[LockMD]

I dont even watch the rx anymore. Plug her in watch gyro go solid listen for the beep beep before moving it, then go fly. Every now and then (not lately) the gyro will stay blinking. I have my other setting at 25 (50% rate mode) so when that does happen just switch down up down up and it goes solid - go fly

[scolex]

I did notice one time I started up and had some tailwag ( thought it was just the wind), but I think I left the throttle at 50% or something close. Next time I started up all zero like you no problem. It was windy that day hmm....