Which hole

[G MAN]

Which hole are you guys using on the main blade grips to get a lot of pitch. I'm using the outside hole but i think i should be using the inside hole. Any reason not to?

JRXCELLMAN

[Kinger]

The inside hole will give you more pitch, but you really shouldn't need to use it. By changing your linkage setup all the way down to the collective servo, you should easily be able to get +/-11 degrees at the blades.

[G MAN]

I'm building the new EVO 50 CCPM, I can only get 10&10. The Swash setting is at 85%,it looks like i either have to put larger servo wheels or move the pivot point on the blade holder closer to get more pitch. i was wanting 12&12.

JRXCELLMAN