iuam
03-20-2008, 01:45 PM
Selling my HBCP2 with upgraded landing gear and twin tail motor mount. Complete with TX, sorry the tip of the antenna is broken. Included are a many spare parts to keep you flying for a while, all spare parts are brand new unless stated. Heli flies good except one of the tail motors currently installed might need to be replaced. All parts currently installed on heli have some use, head has a bit of slop, might want to replace, blades installed are brand new (sym woodies), main motor installed has about 5 flights, new tail boom installed. Was using a computer radio so if you use the E-Sky radio you will have to make some adjustments. Below is a brake down of everything included.
1) HBCP2 with upgraded landing gear and twin tail motor mount, new set of symetrical wood main blades, TX, training gear, two main motor heat sinks, two tail motor heat sinks and one Mega Power 1350 3S 15C battery (have more upon request) = retail as assembled $219.00 WILL SELL FOR $135.00
NEW SPARE PARTS (prices are from HeliDirect.com)
1) Two sets of symmetrical Esky wooden main blades = $14.64
2) One swash plate = $3.64
3) Two paddle control link sets = $5.26
4) Two main blade grip sets = $9.74
5) One Microheli feathering shaft = $6.99
6) Two Sonix feathering shafts = $13.98
7) One paddle control set = $4.87
8) Three new tail motors = $18.33
9) Two new main motors with 9T pinion = $12.22
10) Two tail rotor drive gear sets = $4.88
11) Two main gears = $12.22
12) One pitch control link set = $2.83
13) Five Microheli main shaft sets = $39.95
14) Two flybars = $7.28
15) One motor wire set = $1.23
16) Two sets of plastic symmetrical main blades = $25.98
17) One main body assembly = $7.32
18) One tail boom = $2.63
PLUS A FEW EXTRAS
1) incomplete center hub set = $2.00
2) incomplete rotor head set = $2.00
3) 4 in 1 RX not sure how well it works = FREE
4) Partly assembled head assembly which has some pitch control links with out the ball links, was going to try and install the aluminum balls but never got around to it, all parts are new on this assembly. = $10.00
WILL SELL FOR $230.00 OBO + shipping ( price as listed $343.00)
1) HBCP2 with upgraded landing gear and twin tail motor mount, new set of symetrical wood main blades, TX, training gear, two main motor heat sinks, two tail motor heat sinks and one Mega Power 1350 3S 15C battery (have more upon request) = retail as assembled $219.00 WILL SELL FOR $135.00
NEW SPARE PARTS (prices are from HeliDirect.com)
1) Two sets of symmetrical Esky wooden main blades = $14.64
2) One swash plate = $3.64
3) Two paddle control link sets = $5.26
4) Two main blade grip sets = $9.74
5) One Microheli feathering shaft = $6.99
6) Two Sonix feathering shafts = $13.98
7) One paddle control set = $4.87
8) Three new tail motors = $18.33
9) Two new main motors with 9T pinion = $12.22
10) Two tail rotor drive gear sets = $4.88
11) Two main gears = $12.22
12) One pitch control link set = $2.83
13) Five Microheli main shaft sets = $39.95
14) Two flybars = $7.28
15) One motor wire set = $1.23
16) Two sets of plastic symmetrical main blades = $25.98
17) One main body assembly = $7.32
18) One tail boom = $2.63
PLUS A FEW EXTRAS
1) incomplete center hub set = $2.00
2) incomplete rotor head set = $2.00
3) 4 in 1 RX not sure how well it works = FREE
4) Partly assembled head assembly which has some pitch control links with out the ball links, was going to try and install the aluminum balls but never got around to it, all parts are new on this assembly. = $10.00
WILL SELL FOR $230.00 OBO + shipping ( price as listed $343.00)