ChrisLaFollette
07-18-2005, 11:13 PM
I have a used OS 32 SX-H that has about 2 or 3 gallons through the entire motor. I recently stripped it all down to the bare crank case and checked bearings and the crank and everything else and everything was in perfect condition. I assembled it using Marvel Mystery Oil (same stuff as after run). I DO know what im doing when it comes to motors. I guarantee this engine to run perfect. It has a LOT of compression for a little Os 32 and it made tons of power on 30% in my old R 30 V1. Pics of the motor are in my gallery. I dont know why I did it but a while ago I took an air buffer thingey and polished the sides of the head up so it has kind of a brushed aluminum look to it. Looks kinda cool IMO but anyways this is a good little motor and I guarantee it 100% or your money back.
The carb is the stock 20c but it is missing the clicker thingey that keeps the high end needle from turning, the screws that bolt it to the motor, Carb Barrel retainer screw and thats it. Wont cost but about 10 bucks to get the parts it needs.
Asking $65 plus actual shipping cost. Will come in original box. I will take a MO and maybe a personal check but I wont send the motor out until the check clears.
The carb is the stock 20c but it is missing the clicker thingey that keeps the high end needle from turning, the screws that bolt it to the motor, Carb Barrel retainer screw and thats it. Wont cost but about 10 bucks to get the parts it needs.
Asking $65 plus actual shipping cost. Will come in original box. I will take a MO and maybe a personal check but I wont send the motor out until the check clears.